DIY BTR

28 mm scale for collectors, painters and gamers, e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm scale for collectors, painters and gamers, e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm scale for collectors, painters and gamers, e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm scale for collectors, painters and gamers, e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Maße des Fahrzeugs (ohne Waffe): ca. 107 (L) x 39 (B) x 40 (H) mmPlease note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Cham 2, ein improvisiertes gepanzertes Fahrzeug mit ferngesteuertem Maschinengewehr.Maße des Fahrzeugs (ohne Waffe): ca. 82 (L) x 39 (B) x 39 (H) mmPlease note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 1 Rebellen mit Fernsteuerung und eine DIY fahrbare Plattform mit Maschinengewehr.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 1 Rebellen OHNE Kopf mit Fernsteuerung und eine DIY fahrbare Plattform mit Maschinengewehr.Die Modelle haben KEINE Köpfe und können mit den separaten Rebellenköpfen oder Köpfen anderer Hersteller versehen werden.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 4 Rebellen OHNE Köpfe mit zusammengewürfelter Ausrüstung und bewaffnet mit improvisierten und selbstgebauten Granatwerfern.Die Modelle haben KEINE Köpfe und können mit den separaten Rebellenköpfen oder Köpfen anderer Hersteller versehen werden.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 4 Rebellen mit zusammengewürfelter Ausrüstung und bewaffnet mit improvisierten und selbstgebauten Granatwerfern.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 13 verschiedene Rebellenköpfe, nutzbar mit den "Kopflos"-Varianten oder Modellen anderer Hersteller. Der Hals endet in einer Kugel. Der gezeigte Körper ist ein Beispiel und NICHT enthalten.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 2 Rebellenanführer OHNE Köpfe mit zusammengewürfelter Ausrüstung und bewaffnet mit AKMs.Die Modelle haben KEINE Köpfe und können mit den separaten Rebellenköpfen oder Köpfen anderer Hersteller versehen werden.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 2 Rebellenanführer mit zusammengewürfelter Ausrüstung und bewaffnet mit AKMs.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 3 Rebellen OHNE Köpfe mit zusammengewürfelter Ausrüstung und bewaffnet mit PKM Maschinengewehren.Die Modelle haben KEINE Köpfe und können mit den separaten Rebellenköpfen oder Köpfen anderer Hersteller versehen werden.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 3 Rebellen mit zusammengewürfelter Ausrüstung und bewaffnet mit PKM Maschinengewehren.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 4 Rebellen OHNE Köpfe mit zusammengewürfelter Ausrüstung und bewaffnet mit AKMs.Die Modelle haben KEINE Köpfe und können mit den separaten Rebellenköpfen oder Köpfen anderer Hersteller versehen werden.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 4 Rebellen mit zusammengewürfelter Ausrüstung und bewaffnet mit AKMs.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 2 Rebellen OHNE Köpfe mit zusammengewürfelter Ausrüstung und bewaffnet mit RPGs.Die Modelle haben KEINE Köpfe und können mit den separaten Rebellenköpfen oder Köpfen anderer Hersteller versehen werden.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28 mm Maßstab für Sammler, Maler und Spieler, z.B. für Spectre: Operations, Force on Force, Black Ops, Danger Close, Fireteam Modern oder ähnliche moderne Tabletop Spiele.Das Set beinhaltet 2 Rebellen mit zusammengewürfelter Ausrüstung und bewaffnet mit RPGs.Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Miska Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.