- New products
- Fantasy
- Warmaster (10 mm)
- Fantasy Armies
- Fantasy Skirmish
- Legends of Signum
- Akkari Spider Elves
- Alliance of the Unicorn
- Army of Styx
- Blackmarsh Horde
- Clans of Caledonia
- Dogs of War (Söldner/Mercenaries)
- Dwarves of the Bronze Kingdom
- Free City of Vallor
- Guild of Monster Hunters
- Holy Grypharim Empire
- Keryd-Dum, Cult of the Abyss
- League of Plague Doctors
- Ophidian Alliance
- Pride of the South
- Skagard, Warriors of the North
- Specials
- Gelände und Zubehör
- Science Fiction
- Battlefleet Colossus
- Modern / Ultramodern
- Historical & Pulp
- Other
Filter
–
"Stinger", Vanguard Construct
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€10.00*
"Wasp", Vanguard Construct
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€10.00*
2x Körper für Monster Hunters
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€4.00*
2x Körper für Skagard Shield Maidens
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€3.00*
2x Körper für Vampire Warriors of Styx
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€8.00*
Adisa, the Sorceress Queen
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€16.00*
Aggrog, the Battle Frenzy
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Agnete, the Troll Hunter
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€12.00*
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€9.00*
Akkari Archers (2 models)
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*
Alem, the Sorceress of Threads
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Allu, Sword of the Tide
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Anver, the Gray Tail
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*
Aria, Avatar of the Goddess
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€34.00*
Ariana, Knight of the Temple of Aria
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Aridan the Hunter
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Aries Flamewrath
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€9.00*
Asa, Rider of the League
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€20.00*
Astraea, the Emperor’s Jäger
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Astrid, Maiden of the Shield
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Aud, Protector of Gods
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€8.00*
Audwin, the Steam Hammer
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.50*
Axotra, the Reefs Protector
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.50*
Baetaen, the Storm Roar
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€8.00*