Filter
–
Goblin Guards (6 models)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Oger Königreiche), Age of Sigmar (Ogor Mawtribes), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Die Modelle haben eine Höhe von ca. 28 mm bis zur Oberkante vom Turban.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€9.00*
Persian Ogre Butcher
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Oger Königreiche), Age of Sigmar (Ogor Mawtribes), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Das Modell hat eine Höhe von ca. 54 mm bis zur Oberkante vom Kopf.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€11.00*
Persian Ogre Cannoneers (4 models)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Oger Königreiche), Age of Sigmar (Ogor Mawtribes), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Die Modelle haben eine Höhe von ca. 50 mm bis zur Oberkante vom Kopf.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€23.00*
Persian Ogre Hippo Cavalry Command (2 models)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Oger Königreiche), Age of Sigmar (Ogor Mawtribes), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Ihr erhaltet einen Oger mit Standarte und einen mit Harfen. Das Set ergänzt die Hippo Cavalry zu einer kompletten 4er Einheit.Die Modelle haben eine Höhe von ca. 90 mm bis zur Oberkante vom Kopf.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€44.00*
Persian Ogre Human Slave (Pinup)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Oger Königreiche), Age of Sigmar (Ogor Mawtribes), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Das Modell hat eine Augenhöhe von ca. 31 mm.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*
Persian Ogre Hunter
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Oger Königreiche), Age of Sigmar (Ogor Mawtribes), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Das Modell hat eine Höhe von ca. 65 mm und passt mit den Füßen auf eine 50 mm Base.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€13.00*
Persian Ogre Ironbreakers (4 models)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Oger Königreiche), Age of Sigmar (Ogor Mawtribes), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Ihr erhaltet Anführer (Zweihandaxt), Hornbläser, Standartenträger und einen zufälligen der anderen zwei Oger (Hammer und Schwert) um eine volle 4er Einheit zu spielen.Die Modelle haben eine Höhe von ca. 50 mm bis zur Oberkante vom Kopf.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€24.00*
Persian Ogre Khan
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Oger Königreiche), Age of Sigmar (Ogor Mawtribes), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Das Modell hat eine Höhe von ca. 60 mm bis zur Oberkante vom Turban.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€13.00*
Persian Ogre Slaughtermaster
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Oger Königreiche), Age of Sigmar (Ogor Mawtribes), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Das Modell hat eine Höhe von ca. 65 mm bis zur Oberkante vom Turban.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€26.00*
Persian Ogre Warriors (2 models)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Oger Königreiche), Age of Sigmar (Ogor Mawtribes), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Die Modelle haben eine Höhe von ca. 50 mm.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€14.00*
Persian Ogre Warriors Command (3 models)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Oger Königreiche), Age of Sigmar (Ogor Mawtribes), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Die Modelle haben eine Höhe von ca. 50 mm bis zur Oberkante vom Kopf.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€25.00*
Sabrewolves (2 models)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Oger Königreiche), Age of Sigmar (Ogor Mawtribes), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Aus insgesamt fünf verschiedenen Modelle erhaltet ihr zufällig zwei Modelle.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€8.00*