Filter
–
Acolyte (Chanting)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Frostgrave, Age of Sigmar, Warhammer, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Runeforge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Acolyte (Reading)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Frostgrave, Age of Sigmar, Warhammer, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Runeforge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Acolyte (Wand)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Frostgrave, Age of Sigmar, Warhammer, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Runeforge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Armoured Skeletons (Billhook) (2 models)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Frostgrave, Age of Sigmar, Warhammer, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Runeforge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Armoured Skeletons (Halberd) (2 models)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Frostgrave, Age of Sigmar, Warhammer, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Runeforge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Banshee (Selection)
32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer, Age of Sigmar, Frostgrave, Rangers of Shadow Deep, Warcry, Five Leagues from the Borderlands, Dungeons & Dragons oder sonstige Fantasy Tabletops und Rollenspiele. Die Modelle sind auf einer 25 mm Base abgebildet. Please note, that the model kit has a scenic base included. The pictures show a digital render. Pictures may show additional models for size comparison. These addtional models are not part of this product. The 3D files are from the "Lost Souls" campaign from Monolith Arts. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Banshee Unit (5 models)
32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer, Age of Sigmar, Frostgrave, Rangers of Shadow Deep, Warcry, Five Leagues from the Borderlands, Dungeons & Dragons oder sonstige Fantasy Tabletops und Rollenspiele. Alle 5 Banshees OHNE Bases, um diese als Einheit zu verwenden. Die Modelle sind auf einer 25 mm Base abgebildet. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Pictures may show additional models for size comparison. These addtional models are not part of this product. The 3D files are from the "Lost Souls" campaign from Monolith Arts. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€10.00*
Black Rider
32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer, Age of Sigmar, Frostgrave, Rangers of Shadow Deep, Warcry, Five Leagues from the Borderlands, Dungeons & Dragons oder sonstige Fantasy Tabletops und Rollenspiele. Please note, that the model kit has a scenic base included. The pictures show a digital render. Pictures may show additional models for size comparison. These addtional models are not part of this product. The 3D files are from the "Lost Souls" campaign from Monolith Arts. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€10.00*
Chaos Barbarian Riders (5 models)
Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. These models are larger than normal humans in the original scale. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from The Beholder Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€32.00*
Chaos Barbarians (10 models)
Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. These models are larger than normal humans in the original scale. Please see the size comparison picture for which scale is right for you. The unit is built from different selected blocks. If you select two identical blocks, duplicate models may be mirrored to achieve more variation in the unit. Barbarian Command (3 models): The Command Group is always the depicted gender-mixed group with the same weapons. If selected, they replace 3 random models from the 1. block. Barbarian Despoilers (male, 5 models): 2x hand weapons or hand weapon/shield. Barbarian Despoilers with flails (male, 5 models) Barbarian Razors (female, 5 models): 2x hand weapons or hand weapon/shield. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from The Beholder Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€24.00*
Chaos Demons Thing Pinup
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Slaanesh), Age of Sigmar (Slaanesh Fiends), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Wahlweise nur der Pinup Demon oder Thing mit Pinup Demon zusammen.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Chaos Demons Things (3 Modelle)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Slaanesh), Age of Sigmar (Slaanesh Fiends), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€24.00*
Chaos Knights (5 models)
Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. These models are larger than normal humans in the original scale. Please see the size comparison picture for which scale is right for you. The unit is built from different selected blocks. Duplicate models may be mirrored to achieve more variation in the unit. Command (3 models): The Command Group is always the depicted group with the same weapons. If selected, they replace 3 random models. Chaos Knights (3 models): Hand weapons or lances. If no Command Group is selected, 2 knights will be duplicated. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from The Beholder Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€61.00*
Cobra Cult Assassin Leader
Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for Middle-Earth Strategy Battle Game, OPR Age of Fantasy, Warhammer Fantasy Battles, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Warhammer 40,000, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, Necromunda, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Cobra Cult Assassins (3 models)
Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for Middle-Earth Strategy Battle Game, OPR Age of Fantasy, Warhammer Fantasy Battles, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Warhammer 40,000, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, Necromunda, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€8.00*
Cobra Cult Champion
Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for Middle-Earth Strategy Battle Game, OPR Age of Fantasy, Warhammer Fantasy Battles, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Warhammer 40,000, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, Necromunda, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Cobra Cult Command Group (3 models)
Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for Middle-Earth Strategy Battle Game, OPR Age of Fantasy, Warhammer Fantasy Battles, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Warhammer 40,000, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, Necromunda, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Consists of Captain, Banner Bearer and Musician. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€9.00*
Cobra Cult Commander
Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for Middle-Earth Strategy Battle Game, OPR Age of Fantasy, Warhammer Fantasy Battles, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Warhammer 40,000, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, Necromunda, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Cobra Cult Commander, mounted
Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for Middle-Earth Strategy Battle Game, OPR Age of Fantasy, Warhammer Fantasy Battles, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€8.00*
Cobra Cult Elite Cavalry Modular (2 models)
Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for Middle-Earth Strategy Battle Game, OPR Age of Fantasy, Warhammer Fantasy Battles, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Scale as chosen. Please see the size comparison picture for which scale is right for you. Comes with 2 random horses (out of 4 variants). Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€12.00*
Cobra Cult Elite Cavalry with spears (4 models)
Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for Middle-Earth Strategy Battle Game, OPR Age of Fantasy, Warhammer Fantasy Battles, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€22.00*
Cobra Cult Elite Modular (3 models)
Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for Middle-Earth Strategy Battle Game, OPR Age of Fantasy, Warhammer Fantasy Battles, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Warhammer 40,000, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, Necromunda, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€8.00*
Cobra Cult Elite with spears (5 models)
Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for Middle-Earth Strategy Battle Game, OPR Age of Fantasy, Warhammer Fantasy Battles, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€12.00*
Cobra Cult Slave Driver
Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for Middle-Earth Strategy Battle Game, OPR Age of Fantasy, Warhammer Fantasy Battles, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Warhammer 40,000, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, Necromunda, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*