Desert Skeleton Archers (16 models)

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. The models are one piece each. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. The models are one piece each.A random selection of parts is made, but extra care is taken that it is balanced and duplicates are kept to a minimum. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. A random selection of parts is made, but extra care is taken that it is balanced and duplicates are kept to a minimum. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. A random selection of parts is made, but extra care is taken that it is balanced and duplicates are kept to a minimum. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. A random selection of parts is made.Selecting the Command Group replaces 3 normal models. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. A random selection of parts is made, but extra care is taken that it is balanced and duplicates are kept to a minimum.Selecting the Command Group replaces 3 normal models. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. A random selection of parts is made.Selecting the Command Group replaces parts for 3 (of 6) of the normal skeletons. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.Pictures may show additional models for size comparison. These addtional models are not part of this product.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. A random selection of parts is made, but extra care is taken that it is balanced and duplicates are kept to a minimum.Selecting the Command Group replaces 3 normal models.The models are mostly one piece, but with a separate arm with the weapon. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. A random selection of parts is made, but extra care is taken that it is balanced and duplicates are kept to a minimum.Selecting the Command Group replaces 3 normal models. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. Six horses for conversions. Optionally with chariot poles. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. A random selection of parts is made.Selecting the Command Group replaces the normal models. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. A random selection of parts is made, but extra care is taken that it is balanced and duplicates are kept to a minimum.Selecting the Command Group replaces 3 normal models.The models are mostly one piece, but with a separate arm with the weapon. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. A random selection of parts is made, but extra care is taken that it is balanced and duplicates are kept to a minimum.Selecting the Command Group replaces 3 normal models.The models are mostly one piece, but with a separate arm with the weapon. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. A random selection of parts is made, but extra care is taken that it is balanced and duplicates are kept to a minimum.Selecting the Command Group replaces 3 normal models. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. A random selection of parts is made, but extra care is taken that it is balanced and duplicates are kept to a minimum.Selecting the Command Group replaces 3 normal models. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you.You get a random head and the weapons of choice. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.Pictures may show additional models for size comparison. These addtional models are not part of this product.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you.A random selection of parts is made. Comes with a normal stinger and a stinger with skull. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.Pictures may show additional models for size comparison. These addtional models are not part of this product.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. Both head options are included. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Fantasy mass battle system compatible models, like e.g. Warhammer Fantasy, The Old World, Age of Sigmar, Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Scale as chosen. Please see the size comparison picture for which scale is right for you. Both head options are included. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Crab Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.