Filter
–
"Stinger", Vanguard Construct
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€10.00*
"Wasp", Vanguard Construct
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€10.00*
2x Körper für Monster Hunters
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€4.00*
2x Körper für Skagard Shield Maidens
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€3.00*
2x Körper für Vampire Warriors of Styx
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€8.00*
Aarakocra Druid - Criann
32 mm scale for collectors, painters and gamers, e.g. for Dungeons & Dragons, Warhammer, Age of Sigmar, Frostgrave, Rangers of Shadow Deep, Five Leagues from the Borderlands, or other Fantasy roleplaying games or miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from The Printing Goes Ever On and are from their MMF campaign "DnD is a Woman". These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Aarakocra Monk - Kebei
32 mm scale for collectors, painters and gamers, e.g. for Dungeons & Dragons, Warhammer, Age of Sigmar, Frostgrave, Rangers of Shadow Deep, Five Leagues from the Borderlands, or other Fantasy roleplaying games or miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from The Printing Goes Ever On and are from their MMF campaign "DnD is a Woman". These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Aasimar Warlock - Araquiel
32 mm scale for collectors, painters and gamers, e.g. for Dungeons & Dragons, Warhammer, Age of Sigmar, Frostgrave, Rangers of Shadow Deep, Five Leagues from the Borderlands, or other Fantasy roleplaying games or miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from The Printing Goes Ever On and are from their MMF campaign "DnD is a Woman". These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Acolyte (Chanting)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Frostgrave, Age of Sigmar, Warhammer, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Runeforge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Acolyte (Reading)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Frostgrave, Age of Sigmar, Warhammer, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Runeforge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Acolyte (Wand)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Frostgrave, Age of Sigmar, Warhammer, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Runeforge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Adisa, the Sorceress Queen
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€16.00*
Aggrog, the Battle Frenzy
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Agnete, the Troll Hunter
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€12.00*
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€9.00*
Akkari Archers (2 models)
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*
Alem, the Sorceress of Threads
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Allu, Sword of the Tide
custom.games.Signum Alternatively, the mordels are also available in 32 mm scale and can be easily used in other game systems,e.g. for Spectre: Operations, Asymmetric Warfare, InCountry, Force on Force, Black Ops, Danger Close, Fireteam Modern or similar miniature wargames in modern or ultramodern setting. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are created by Signum Workshop and specifically for the game Legends of Signum . Of course they can be used in any other gaming system. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
ALT/OLD: Swamp Keeper
ATTENTION: Bestiarum changed the size of their models to a more consistent scale and re-released old models (small reworks, fewer parts, new scale).This is an OLD model, it may not fit well with newer models. 35 mm Maßstab für Sammler, Maler und Spieler, z.B. für Kingdom Death, Dark Souls, Dungeons & Dragons, Warhammer, Age of Sigmar, Frostgrave, oder sonstige Fantasy Tabletops und Rollenspiele.Das Modell hat eine Höhe von ca. 100 mm.Printed resin bases make up a significant part of the total price and in many cases you want to stay consistent within a system or army and use different bases anyway. Therefore, the product is available with the pictured bases or without bases.Please note: the base may contain a piece of scenery such as a stone on which the model would stand and therefore needs a bit of work to use it on another base. The pictures show a digital render. Pictures may show additional models for size comparison. These addtional models are not part of this product. The 3D files are from Bestiarum Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€17.00*
Altar der Erde
Altar der Erde im 28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Dungeons & Dragons, Warhammer, Age of Sigmar, Frostgrave, oder sonstige Fantasy Tabletops und Rollenspiele. The pictures show a printed product, often in conjunction with additional digital render images. The prints are usually without final cleanup, but as delievered. The final colour of the material may differ. custom.theme.valtan These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€4.00*
Amazon Elf
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. Scale as chosen. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D files are from Vae Victis Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Angrboda
Scale as chosen. For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Francesca Musumeci. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Animal Men Beastlord
10 mm scale for collectors, painters and gamer, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames.Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. Please note that the base is an integral part of the model and not a separate piece. The pictures show a digital render. The 3D files are from Ankylo Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€4.00*
Animal Men Chariots (3 models)
10 mm scale for collectors, painters and gamer, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames.Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. Please note that the base is an integral part of the model and not a separate piece. The pictures show a digital render. The 3D files are from Ankylo Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*