Filter
–
Chaos Demons Thing Pinup
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Slaanesh), Age of Sigmar (Slaanesh Fiends), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Wahlweise nur der Pinup Demon oder Thing mit Pinup Demon zusammen.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Chaos Demons Things (3 Modelle)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Slaanesh), Age of Sigmar (Slaanesh Fiends), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€24.00*
Corrupted Caster
Demon in 32 mm scale for collectors, painters and gamers, e.g. as proxies for Chaos Demons in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*
Demon Snail
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€8.00*
Demon Snails (3 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€18.50*
Demonic Flamethrowers (3 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€12.00*
Demons of Excess (10 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. 6 different models. The further 4 will be random duplicates and may be mirrored. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€20.50*
Demons of Excess (6 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€16.50*
Harold The Heroic Terror
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€8.00*
Hell Dogs (5 Modelle)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Chaos Demons), Age of Sigmar, WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Ihr erhaltet 3 verschiedene Modelle, die 2 weiteren sind gespiegelte Versionen.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€23.00*
Indigo Terrors (10 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. 6 different models. The further 4 will be random duplicates and may be mirrored. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€20.00*
Indigo Terrors (6 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€13.00*
Magenta Terrors (10 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. 6 different models. The further 4 will be random duplicates and may be mirrored. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€21.00*
Magenta Terrors (6 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€16.00*
Malkia (Pinup)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Chaos Demons), Age of Sigmar, WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.50*
Poxduke
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*
Poxlings (15 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€14.00*
Princeling of Excess
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*
Spike-Beasts of Excess (3 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€16.00*
Spreaders of Disease (10 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. 6 different models. The further 4 will be random duplicates and may be mirrored. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€22.00*
Spreaders of Disease (6 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€17.50*
Sulfurous Terrors (10 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Contains a random mix from 5 different models, which can be assembled to 10 bases with 2 Terrors each. The splitting Terror counts as 2 models for this purpose. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€16.00*
Sulfurous Terrors (3 models)
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*
Tiny Satyr
For Fantasy skirmish wargames like e.g. Mordheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like Dungeons & Dragons, Pathfinder, or Mörk Borg. The models are in 30-32 mm scale. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images. Printed and painted model by Warp Miniatures.The 3D files are from Warp Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€4.00*