Filter
–
Abominable Snow Devil
Christmassy snow monster in 32 mm scale for collectors, painters and gamers, e.g. as proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. The model has a height of approx. 55 mm. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€9.00*
Ankylosaurus Tank
Armed dinosaur of the Dino-rider Elves in 32 mm scale for collectors, painters and gamers, e.g. as Eldar Exodites or proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. The model has measurements of approx. 53 x 139 x H78 mm (all to the tip of the tail). Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€18.00*
Asteroid/Moon with research station
Large asteroid or moon with research station for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Diameter approx. 30 mm.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Corrupted Caster
Demon in 32 mm scale for collectors, painters and gamers, e.g. as proxies for Chaos Demons in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*
Cursed Elves Dreadnought Class
Spaceship of the Cursed Elves for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Suitable in size for a cruiser.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€11.00*
Cursed Elves Escorts (3 models)
Spaceships of the Cursed Elves for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Suitable in size for escort ships. Contains 3 random models from the two shown variants.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.50*
Cursed Elves Space Station
Space station of the Cursed Elves for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€24.00*
Cursed Elves Star Gate
Star Gate of the Cursed Elves for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Feral Ankylosaurus
Dinosaur of the Dino-rider Elves in 32 mm scale for collectors, painters and gamers, e.g. as Eldar Exodites or proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. The model has measurements of approx. 53 x 139 x H78 mm (all to the tip of the tail). Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€16.00*
Feral Raptors (4 models)
Dinosaurs of the Dino-rider Elves in 32 mm scale for collectors, painters and gamers, e.g. as Eldar Exodites or proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€18.00*
Feral Rex
Dinosaur of the Dino-rider Elves in 32 mm scale for collectors, painters and gamers, e.g. as Eldar Exodites or proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. The model has measurements of approx. 59 x 243 x H130 mm (head to the tip of the tail). Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€35.00*
Feral Super Raptor
Dinosaur of the Dino-rider Elves in 32 mm scale for collectors, painters and gamers, e.g. as Eldar Exodites or proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. The model has measurements of approx. 60 x 171 x H71 mm (head to the tip of the tail). Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€25.00*
Flying stem with ball head (10 pieces)
10x flying stems with 4 mm ball head. Suitable for spaceship models from Edge Miniatures.The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€3.00*
Lord on Rex
Dino-rider Elf Lord in 32 mm scale for collectors, painters and gamers, e.g. as Eldar Exodites or proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. The model has measurements of approx. 59 x 243 x H130 mm (head to the tip of the tail of the Rex). Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€38.00*
Lord on Super Raptor
Dino-rider Elf Lord in 32 mm scale for collectors, painters and gamers, e.g. as Eldar Exodites or proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. The model has measurements of approx. 60 x 171 x H71 mm (head to the tip of the tail of the Super Raptor). Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€28.00*
Raptor Riders (4 models)
Dino-rider Elves in 32 mm scale for collectors, painters and gamers, e.g. as Eldar Exodites or proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€25.00*
Sand Walker Pinup (selection)
Dino-rider Elves in 32 mm scale for collectors, painters and gamers, e.g. as Eldar Exodites or proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Sand Walkers (5 models)
Dino-rider Elves in 32 mm scale for collectors, painters and gamers, e.g. as Eldar Exodites or proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€13.50*
Snow Devil (selection)
Snow monsters in 32 mm scale for collectors, painters and gamers, e.g. as proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. Depending on the pose, the models have a height of approx. 49-59 mm. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€8.00*
Snow Devils (3 models)
Snow monsters in 32 mm scale for collectors, painters and gamers, e.g. as proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. Depending on the pose, the models have a height of approx. 49-59 mm. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€21.00*
Snow Elves Hoverboarder (selection)
Snow Elves in 32 mm scale for collectors, painters and gamers, e.g. as proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Snow Elves Hoverboarders (3 models)
Snow Elves in 32 mm scale for collectors, painters and gamers, e.g. as proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€13.00*
Snow Elves Recon Snipers (3 models)
Snow Elves in 32 mm scale for collectors, painters and gamers, e.g. as proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€9.00*
Snow Elves Rider (selection)
Snow Elves in 32 mm scale for collectors, painters and gamers, e.g. as proxies for Dark Eldar/Eldar in Warhammer 40,000 or Kill Team; or in games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction wargames and roleplaying games. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Edge Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€10.00*