Protectors of the Machines Cruiser
€18.00*
Available in 20 days, delivery time 2-5 days
Aufgrund von Lizenzvereinbarungen kann dieses Produkt nicht nach UK oder die USA verschickt werden. / Due to licensing agreements, this product can't be shipped to the UK or USA.
Product number:
TTS11133
Manufacturer
Italianmoose
Weight:
0.039 kg
Protectors of the Machines Cruiser
Protectors of the Machines spaceships for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.
Please note that the models are supplied WITHOUT bases.
The pictures show a digital render.
The 3D files are from Italianmoose.
These 3D files are produced and sold under a commercial licence.
Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short.
The models are delivered unpainted and unassambled.
This is a 3D printed product made of UV hardened resin.
Support structures are removed after the print, the model cleaned and then completely UV cured.
Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.
Remains of the supports should be removed with a sharp hobby knife.
It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.
If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.
If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying.
Support structures are removed after the print, the model cleaned and then completely UV cured.
Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.
Remains of the supports should be removed with a sharp hobby knife.
It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.
If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.
If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying.
Important notice
Warning! Not for children under the age of 3. Choking hazard due to small parts.
This product is not a toy.
Warning! Not for children under the age of 3. Choking hazard due to small parts.
This product is not a toy.
0 of 0 reviews
Login
No reviews found. Be the first to share your insights.
Protectors of the Machines
Abyss Class Dreadnought
The Abyss Class Dreadnought measures approx. 350 mm in total length and is a massive display piece, guaranteed to improve any book shelf or hobby cellar room. With fan expansions and homebrew rules it would even be possible to use it in games like Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other science fiction spaceship wargames.Note: Due to its size and weight distribution this ship is only recommended for experienced model builders. Pins are highly recommended. Please remember to sand only using a dust mask and/or wet sanding paper.When chosen with the optional "special base" you get the pictured 90 mm base with offset flying stem and fire/orientation arcs.Printed resin bases make up a significant part of the total price and in many cases you want to stay consistent within a system or army and use different bases anyway. Therefore, the product is available with the pictured bases or without bases.Please note: the base may contain a piece of scenery such as a stone on which the model would stand and therefore needs a bit of work to use it on another base. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €70.00*
Imperial ship weaponry [Italianmoose] (2x2 broadsides)
Spaceships weaponry for the Imperial ships (including Protectors of the Machines) from Italianmoose. Each selection is included twice. With the two selected options, a cruiser is completely armed and each loadout configuration possible. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€3.00*
Omnicruiser
The Omnicruiser transcends the definitions of imperial factions. Is it a cruiser of the Imperium, the Protectors of the Machines, the Interrogators or even one of the Super Warriors? Or a bit of each? With this configurator, you get to decide. Suitable for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame. Contains additionally to the chosen configuration: underslung Prow-Cannon and a ram. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€17.00*
Protectors of the Machines Battleship
Protectors of the Machines spaceships for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€28.00*
Protectors of the Machines Cruiser
Protectors of the Machines spaceships for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€18.00*
Protectors of the Machines Light Cruiser
Protectors of the Machines spaceships for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€15.00*