Gremlin IFV

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Includes laser and auto cannons for the front.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Includes two options for the front hull weapon (mortar cannon or las cannon) and four options for the front hatch (empty hatch, laser, flamer or machine gun).Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Includes two options for the front hull weapon (cannon or flamer), two options for the turret (cannon or laser), optional las rifles for the rear fire hatches and optional bodies for the turret hatch.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Includes 3 of 4 random legs and weapons as chosen.Ripper Rifle: 3 different bodies with rifleMace/Shield: 3 torsos (from 2 different ones, one is a duplicate), 3 maces (from 2 different ones, one is a duplicate), 3 shields (from 2 different ones, one is a duplicate) Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Pictures may show additional models for size comparison. These addtional models are not part of this product. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.The Infantry Builder is too much right now or you just want to drop down some basic laser rifles on table? Then you've come to the right listing: 10x legs, 10x torsos with laser rifles and 10x heads of your choice.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames. Please note: Medic 3 has no modular legs. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Includes 5x chosen heads and, depending on the choice, 5 additional fitting heads (e.g. without helmet, without gas mask, without eye protection, etc.) to further individualise the squad. Pictures to follow.Contains: 5x horses (4 different ones, one random and maybe mirrored duplicate)5x legs (4 different ones, one random and maybe mirrored duplicate)Random selection of the normal torsos with spears from 6 different torsos. If you have a specific request, please use the comment field during checkout.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Includes 3 different heads.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Includes 10x chosen heads.Only the basic infantry legs have 10 different poses. If another option is chosen, fitting legs are either added from another set or duplicated and perhaps mirrored from the chosen set.It's always possible to build 10 models from this set.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Includes 10x chosen heads and, depending on the choice, 5 additional fitting heads (e.g. without helmet, without gas mask, without eye protection, etc.) to further individualise the squad. Pcitures to follow.Only the basic infantry legs have 10 different poses. If another option is chosen, fitting legs are either added from another set or duplicated and perhaps mirrored from the chosen set.It's always possible to build 10 models from this set.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Includes the two pictured heads.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Contains a fitting selection of static leg poses from the chosen variant.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Includes 5x chosen heads and 5x chosen legs (random selection if there are more than 5 different poses). Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

28-32 mm scale for collectors, painters and gamer , e.g. for Warhammer 40,000, Kill Team, Stargrave, Five Parsecs from Home, or other Science Fiction wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted model by Quartermaster 3D. The 3D file are from Quartermaster 3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.