Filter
–
Alien Cult Alpha Biker
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer 40.000 (Genestealer Cult), Kill Team, Stargrave, Rogue Stars, oder sonstige Sciene Fiction Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*
Alien Cult Assault Buggy
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer 40.000 (Genestealer Cult), Kill Team, Stargrave, Rogue Stars, oder sonstige Sciene Fiction Tabletops und Rollenspiele.Das Modell kann wahlweise mit Raketenwerfer oder Maschinengewehr auf der Ladefläche gebaut werden.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€18.00*
Alien Cult Bikers (2 models)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer 40.000 (Genestealer Cult), Kill Team, Stargrave, Rogue Stars, oder sonstige Sciene Fiction Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€11.00*
Alien Cult Lotus
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer 40.000 (Genestealer Cult), Kill Team, Stargrave, Rogue Stars, oder sonstige Sciene Fiction Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Alien Cult Magus (Pinup)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer 40.000 (Genestealer Cult), Kill Team, Stargrave, Rogue Stars, oder sonstige Sciene Fiction Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Alien Cult Matriarch
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer 40.000 (Genestealer Cult), Kill Team, Stargrave, Rogue Stars, oder sonstige Sciene Fiction Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€21.00*
Alien Cult Monsters (3 models)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer 40.000 (Genestealer Cult), Kill Team, Stargrave, Rogue Stars, oder sonstige Sciene Fiction Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€20.00*
Alien Cult Patriach on Throne
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer 40.000 (Genestealer Cult), Kill Team, Stargrave, Rogue Stars, oder sonstige Sciene Fiction Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€16.00*
Alien Cult Patriarch
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer 40.000 (Genestealer Cult), Kill Team, Stargrave, Rogue Stars, oder sonstige Sciene Fiction Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€12.00*
Alien Cult Throne
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer 40.000 (Genestealer Cult), Kill Team, Stargrave, Rogue Stars, oder sonstige Sciene Fiction Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€10.00*
Berserker Worm Rocket Team
32 mm scale for collectors, painters and gamers, e.g. as proxies for Leagues of Votann in Warhammer 40,000 and Kill Team; or for games like Stargrave, Five Parsecs from Home, Rogue Stars or other Sciene Fiction miniature wargames and roleplaying games.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*
Chaos Demons Thing Pinup
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Slaanesh), Age of Sigmar (Slaanesh Fiends), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Wahlweise nur der Pinup Demon oder Thing mit Pinup Demon zusammen.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Chaos Demons Things (3 Modelle)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Warhammer Fantasy (Slaanesh), Age of Sigmar (Slaanesh Fiends), WarCry, Frostgrave, Dungeons & Dragons, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€24.00*
Chaos Leader
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Age of Sigmar, Warhammer Fantasy Battles, Warcry, Dungeons & Dragons, Frostgrave, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Chaos Lord auf Charcadon
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Age of Sigmar, Warhammer Fantasy Battles, Warcry, Dungeons & Dragons, Frostgrave, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€23.00*
Chaos Lord auf Manticore
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Age of Sigmar, Warhammer Fantasy Battles, Warcry, Dungeons & Dragons, Frostgrave, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€43.00*
Chaos Mage auf Manticore
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Age of Sigmar, Warhammer Fantasy Battles, Warcry, Dungeons & Dragons, Frostgrave, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€43.00*
Chaos Queen on Throne (Pinup)
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Age of Sigmar, Warhammer Fantasy Battles, Warcry, Dungeons & Dragons, Frostgrave, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.00*
Chaos Throne
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Age of Sigmar, Warhammer Fantasy Battles, Warcry, Dungeons & Dragons, Frostgrave, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.50*
Charcadon
28-32 mm Maßstab für Sammler, Maler und Spieler, z.B. für Age of Sigmar, Warhammer Fantasy Battles, Warcry, Dungeons & Dragons, Frostgrave, oder sonstige Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€23.00*
Dungeon Hero: Barbarian
28 mm Maßstab für Sammler, Maler und Spieler, z.B. für HeroQuest als Barbar, Warhammer Quest, Age of Sigmar, Warhammer Fantasy Battles, Warcry, Dungeons & Dragons, Frostgrave, oder sonstige Dungeon Crawler, Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Dungeon Hero: Dwarf 1
28 mm Maßstab für Sammler, Maler und Spieler, z.B. für HeroQuest als Zwerg, Warhammer Quest, Age of Sigmar, Warhammer Fantasy Battles, Warcry, Dungeons & Dragons, Frostgrave, oder sonstige Dungeon Crawler, Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Dungeon Hero: Rogue
28 mm Maßstab für Sammler, Maler und Spieler, z.B. für HeroQuest als Alb, Warhammer Quest, Age of Sigmar, Warhammer Fantasy Battles, Warcry, Dungeons & Dragons, Frostgrave, oder sonstige Dungeon Crawler, Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*
Dungeon Hero: Wizard
28 mm Maßstab für Sammler, Maler und Spieler, z.B. für HeroQuest als Zauberer, Warhammer Quest, Age of Sigmar, Warhammer Fantasy Battles, Warcry, Dungeons & Dragons, Frostgrave, oder sonstige Dungeon Crawler, Fantasy Tabletops und Rollenspiele.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Ghamak. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€6.00*