Filter
–
Arab Bowmen (5 models)
Scale as chosen for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Arab Camel Riders (5 models)
Scale as chosen for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €14.00*
Arab Cavalry (5 models)
Scale as chosen for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €11.00*
Arab Civilians (3 models)
Scale as chosen for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €5.00*
Arab Commanders (5 models)
Scale as chosen for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €14.00*
Arab Light Cavalry (5 models)
Scale as chosen for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €11.00*
Arab Skirmishers (5 models)
Scale as chosen for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Arab Spearmen (5 models)
Scale as chosen for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Arab Warband (5 models)
Scale as chosen for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Ark of the Covenant (2 models)
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames. Incldues the Ark with bearers and a second separate Ark that can be used as an objective or something similar. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €7.00*
Camels (4 models)
Scale as chosen for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €8.00*
Civilians of the Ancient Middle East (5 Modelle)
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
David
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€4.00*
David vs Goliath (Diorama)
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €5.00*
Egyptian Bowmen (5 models)
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Egyptian Command Group (3 models)
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €4.00*
Egyptian Light Chariots (3 models)
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €18.00*
Egyptian Royal Guard (5 models)
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Egyptian Warriors (5 models)
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Goliath
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €4.00*
Hebrew Heroes (5 models)
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Hebrew Skirmishers (5 models)
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Hebrew Spearmen (5 models)
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*
Hebrew Warband (5 models)
28 mm scale for collectors, painters and gamers, e.g. for Hail Caesar, Field of Glory, Triumph, Mortem et Gloriam, Impetus!, or other historical miniature wargames.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. Printed and painted models by Red Copper Miniatures. The 3D files are from Red Copper Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
From €6.00*