S'igma Protector Cruiser
Load 3D model
Load 3D model
€9.00*
Production up to 20 days, after that delivery time 2-5 days
Aufgrund von Lizenzvereinbarungen kann dieses Produkt nicht nach UK oder die USA verschickt werden. / Due to licensing agreements, this product can't be shipped to the UK or USA.
Product number:
TTS11165
Manufacturer
Italianmoose
Weight:
0.01 kg
S'igma Protector Cruiser
S'igma Empire spaceship of the Protector Caste for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.
Please note that the models are supplied WITHOUT bases.
The pictures show a printed product, often in conjunction with additional digital render images. The prints are usually without final cleanup, but as delievered. The final colour of the material may differ.
The 3D files are from Italianmoose.
These 3D files are produced and sold under a commercial licence.
Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short.
The models are delivered unpainted and unassambled.
This is a 3D printed product made of UV hardened resin.
Support structures are removed after the print, the model cleaned and then completely UV cured.
Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.
Remains of the supports should be removed with a sharp hobby knife.
It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.
If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.
If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying.
Support structures are removed after the print, the model cleaned and then completely UV cured.
Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.
Remains of the supports should be removed with a sharp hobby knife.
It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.
If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.
If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying.
Important notice
Warning! Not for children under the age of 3. Choking hazard due to small parts.
This product is not a toy.
Warning! Not for children under the age of 3. Choking hazard due to small parts.
This product is not a toy.
0 of 0 reviews
Login
No reviews found. Be the first to share your insights.
Manufacturer in the sense of the General Product Safety Ordinance (GPSR): Tabletop-Stuff - Simon Saier
Manufacturer Address: Bichler Str. 4a, 82377 Penzberg, Germany
Manufacturer Email: info@tabletop-stuff.de
Manufacturer Address: Bichler Str. 4a, 82377 Penzberg, Germany
Manufacturer Email: info@tabletop-stuff.de
S'igma Empire
S'igma Escorts (3 models)
S'igma Empire spaceships for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€9.00*
S'igma Explorer Class
S'igma Empire spaceship of the Explorers Caste for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€26.00*
S'igma Explorers Hero Class
S'igma Empire spaceship of the Explorers Caste for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€18.00*
S'igma Explorers Merchant Class
S'igma Empire spaceship of the Explorers Caste for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€16.00*
S'igma Gunships (3 models)
S'igma Empire spaceships for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€7.50*
S'igma Protector Cruiser
S'igma Empire spaceship of the Protector Caste for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a printed product, often in conjunction with additional digital render images. The prints are usually without final cleanup, but as delievered. The final colour of the material may differ. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€9.00*
S'igma Protector Fleet Carrier
S'igma Empire spaceship of the Protector Caste for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€18.00*
S'igma Protector Light Cruiser
S'igma Empire spaceship of the Protector Caste for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€8.00*
Space Dwarves Bomber Markers (10 pcs)
Bomber markers for the Space Dwarves. For collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargames. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Fusion Shipyards. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€15.00*
Space Dwarves Cruiser
Spaceship of the Space Dwarves. For collectors, painters and gamers, eg. as Demiurg in Battlefleet Gothic; or for Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargames. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Fusion Shipyards. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€15.00*
Space Dwarves Escorts (3 models)
Spaceships of the Space Dwarfves for collectors, painters and gamers, eg. for Battlefleet Gothic, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargame.Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Italianmoose. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€12.50*
Space Dwarves Freighters (3 models)
Spaceships of the Space Dwarves. For collectors, painters and gamers, eg. as Demiurg in Battlefleet Gothic; or for Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargames. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Fusion Shipyards. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€14.00*
Space Dwarves Light Cruiser
Spaceship of the Space Dwarves. For collectors, painters and gamers, eg. as Demiurg in Battlefleet Gothic; or for Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargames. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Fusion Shipyards. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€10.00*
Space Dwarves Mining Vessels (3 models)
Spaceships of the Space Dwarves. For collectors, painters and gamers, eg. as Demiurg in Battlefleet Gothic; or for Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargames. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Fusion Shipyards. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€14.50*
Space Dwarves Warp Cutters (3 models)
Spaceships of the Space Dwarves. For collectors, painters and gamers, eg. as Demiurg in Battlefleet Gothic; or for Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargames. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Fusion Shipyards. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.
€13.00*