Dark Elf Crossbows (12 strips)

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. Multiple models are connected on a strip. These strips can then be attached to a game-system fitting base, e.g. two strips on a 40 x 20 mm base. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. Multiple models are connected on a strip. These strips can then be attached to a game-system fitting base, e.g. four strips on a 20 x 40 mm base. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames.Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamer, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames.Multiple models are connected on a strip. These strips can then be attached to a game-system fitting base, e.g. two strips on a 40 x 20 mm base. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. Multiple models are connected on a strip. These strips can then be attached to a game-system fitting base, e.g. two strips on a 40 x 20 mm base. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. Multiple models are connected on a strip. These strips can then be attached to a game-system fitting base, e.g. two strips on a 20 x 40 mm base. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. Multiple models are connected on a strip. These strips can then be attached to a game-system fitting base, e.g. two strips on a 20 x 40 mm base. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. The models can be printed with or without integral bases. Please note that no bases are included as extra pieces. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

10 mm scale for collectors, painters and gamers, e.g. for Warmaster, Minihammer, or other "scaled down" games like Kings of War, Oathmark, Dragon Rampant, or other fantasy miniature wargames. Due to the way the models are printed, there are some supports still attached between model and base. These can be easily removed with a sharp hobby knife and/or clippers. Multiple models are connected on a strip. These strips can then be attached to a game-system fitting base, e.g. two strips on a 40 x 20 mm base. The pictures show a digital render. The 3D files are from Forest Dragon. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.