Canadian 6pdr Anti-Tank Gun

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. For ease of loading/removing, the passengers are merged together in small groups with 'fillers' and are not single models (see the pictures). Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. For ease of loading/removing, the passengers are merged together in small groups with 'fillers' and are not single models (see the pictures). Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. For ease of loading/removing, the passengers are merged together in small groups with 'fillers' and are not single models (see the pictures). Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. The models can be chosen with full kit (backpacks, spades, etc.) or in battle-order (no additional stuff). The models have the following roles/weapons: 1x NCO with Sten MP 1x Bren machine gun 1x loader for the Bren with rifle on the back 7x rifles Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. The crew and passengers are available with different helmet variants and are chosen randomly. The model comes with a driver, a gunner with 2" mortar, a sitting passenger, and a spare wheel. Additional equipment that may be pictured is not included. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. The crew and passengers are available with different helmet variants and are chosen randomly. The Wasp has an integrated flamethrower and additionally a pintle mount with a Bren MG. The model comes with a driver, a sitting passenger, and a spare wheel. Additional equipment that may be pictured is not included. The weapon on the pintle mount can be replaced with a different one with the separately available stowage set. There may be conversion work needed for that. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Includes: 3x weapons in mounts (rifles, Bren, PIAT) 4x equipment (radio, water canister, Vickers ammo tin, bomb crate) 5x stationary weapons (Browning .50cal, Vickers, Bren level, Bren pointing up, 2" mortar) Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. The models have the following roles/weapons: 1x NCO with Thompson MP 1x Thompson MP 1x Marksman with rifle/scope and Sten MP on the back 1x Bren machine gun 1x Bren machine gun prone 1x prone loader for the Bren with Thompson MP 3x rifles 1x random duplicate of one of the rifle poses as there are only 9 different sculpts Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

For miniature wargames in a World War II setting like e.g. Bolt Action or Chain of Command. Infantry models are scaled down to 28 mm scale according to the designer's instructions to better fit into other product lines. Vehicles are in 1/56. Any visible crew members are scaled to fit the infantry, so sometimes small gaps can appear between crew and vehicle. Please note that the models are supplied WITHOUT bases. The pictures show a printed and painted product, often in conjunction with additional digital render images.The 3D files are from RKX Miniatures. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin.Support structures are removed after the print, the model cleaned and then completely UV cured.Nevertheless, small "scars" remain where the support structure touched the model. These are production-related and do not represent a defect in the product.Remains of the supports should be removed with a sharp hobby knife.It's possible that these models are hollow. In this case, the drainage holes should be closed with modelling putty.If possible, the supports were attached at the underside of the model, so they are not notable on the tabletop when viewed from above and from the front.If you need an uncured model, with support structures still attached or any other special orders, please contact me BEFORE buying. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.