Cobra Cult Guards with MGs (2 models)

Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for OPR Age of Fantasy (Regiments), Kings of War, Oathmark, Dragon Rampant, Broheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for OPR Age of Fantasy (Regiments), Kings of War, Oathmark, Dragon Rampant, Broheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for OPR Age of Fantasy (Regiments), Kings of War, Oathmark, Dragon Rampant, Broheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for OPR Age of Fantasy (Regiments), Kings of War, Oathmark, Dragon Rampant, Broheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Consists of Captain, Banner Bearer and Musician. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for OPR Age of Fantasy (Regiments), Kings of War, Oathmark, Dragon Rampant, Broheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Comes with 2 random horses (out of 4 variants). Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for OPR Age of Fantasy (Regiments), Kings of War, Oathmark, Dragon Rampant, Broheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for OPR Age of Fantasy (Regiments), Kings of War, Oathmark, Dragon Rampant, Broheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for OPR Age of Fantasy (Regiments), Kings of War, Oathmark, Dragon Rampant, Broheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for OPR Age of Fantasy (Regiments), Kings of War, Oathmark, Dragon Rampant, Broheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Comes with 2 random horses (out of 4 variants). Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for OPR Age of Fantasy (Regiments), Kings of War, Oathmark, Dragon Rampant, Broheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Comes with 2 random horses (out of 4 variants). Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different Fantasy miniature wargames like e.g. for OPR Age of Fantasy (Regiments), Kings of War, Oathmark, Dragon Rampant, Broheim, Frostgrave, Rangers of Shadow Deep, Forbidden Psalm, Relicblade, or Five Leagues from the Borderland. Also for RPGs like The One Ring, Dungeons & Dragons, Pathfinder, or Mörk Borg. Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Depending on the chosen scale, compatible with different SciFi miniature wargames like e.g. for OPR Grimdark Future, Infinity, Rogue Planet, Kill Team, Stargrave, Five Parsecs from Home, Rogue Stars, or Core Space. Scale as chosen. Please see the size comparison picture for which scale is right for you. Please note that the models are supplied WITHOUT bases. The pictures show a digital render.The 3D file are from Quartermaster3D. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.