The Advance class frigates are fast and durable, yet only lightly armed blockade runners. Perfect for discrete travel or transportation, ships of this class are used by Free Traders, members of the Inquisition or the Logos Historica Verita. Based on the Advance, the Asterion class frigate sacrifices some speed in favour of pretty extensive weaponry for her size. Deployed for trade protection and recently used as a dedicated Q-ship, many raiders have learned the hard way not to underestimate its short range firepower. Spaceships of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. The ships are 53 mm long and can be used as Rogue Trader escorts. They can also be used as blockade runners, smuggling ships or unique character's ships.These ships are based on a cool kitbash made by our fellow admiral Bleachhawk from the Battlefleet Gothic Discord. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Commonly seen all around the galaxy in convoys or part of a solo adventure, Argosies exist in all sort of shapes and patterns. Smaller than Trade Galleons, these versatile ships often bear a pletora of modifications added during their travels elevating them above mere transport ships. Spaceship of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. Models are about 60 mm long and can be used as Rogue Trader light cruisers or "Remus" and "Vesprugo" Merchantman patterns from Warp Rift issue 17. They can also represent civilian and marauder ships or medium freighters. Only compatible with 17 mm broadsides, e.g. from Bluesquat or Soulforge Studios. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Weapon bays of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. Only compatible with ships with 17 mm broadsides, e.g. from Bluesquat or Soulforge Studios. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Weapon bays of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. Default width for Imperial ships. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Built on a distant forge world, Freelancers hulls are highly sought after by independant captains for their ease of modification and the strange technologies that can be accomodated. Each ship is tailor-made by it's owner and bears the marks of it's travels into the void. Spaceship of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. The ship is about 83 mm long and can be used as a classic Rogue Trader cruiser. It can also represent any sorts of marauder, pirate or exploration cruiser. Only compatible with 17 mm broadsides, e.g. from Bluesquat or Soulforge Studios. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Smaller than it's cruiser sibling, this type of ship is at ease at the helm of attack squadrons or light patrol groups. Due to its speed and versatility it can easily support its fleet and repel any would be raiders. This, of course, makes it a dangerous adversary for lone transports would the ship fall into the wrong hands. Spaceship of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. The ship is about 70 mm long and can represent a variety of light cruisers like Dauntless, Endeavour, Endurance, Defiant or Defender. It can also be used as any sort of marauder, pirate or exploration light cruiser. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Merchants and marauders often enroll various alien ships to compensate for their own lack of expensive laser and energy weaponry. But beware as they could be as much be part of a dangerous wolfpack hunting down unsuspecting convoys. Spaceships of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. Models are between 35 mm and 50 mm long and can be used to represent xenos escorts from Warp Rift issue 17 and classic Rogue Trader escorts as well as any small ships to fill and add variety to your space fleet. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Merchants fleets have access to a lot of different escorts, ships from several sectors and origins but fulfilling similar roles. Convoy escorts navigate along a myriad of converted transports and old ex-mothballed military ships. Spaceships of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. Models are between 30 mm and 35 mm long and can be used as Rogue Trader escorts from Warp Rift issue 17. The Brigantine could also represent a Sword or Havoc, the Barque a Firestorm and the Pinnace, a Cobra and its variants. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Either built as such, based on a converted escort or an unfinished light cruiser hull, this type of ship can fill any gap in a merchant (or Smuggler) fleet, from a swift blockade runner to a compact heavy hitter. A lot of commanders use a ketch before being able to obtain much rarer and expensive cruiser hulls. Spaceship of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. Models are about 45 mm long and can be used as Rogue Trader Lorchas from Warp Rift issue 17. They can also represent civilian and marauder ships or heavy escorts. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Being the opportunistic individuals they invariably are, it is not uncommon for Free Traders to ‘acquire’ decommissioned Navy vessels or those relegated to a reserve fleet. Despite typically being in poor condition, it is well within most Free Trader’s means to refit and restore such a vessel, sometimes using systems and technology quite unlike its original components. Due to the weapons mounted by such vessels such as torpedo tubes, an experienced crew is needed to man true warships such as this. Free Traders will typically recruit mercenaries, retired Naval ratings and able spacers or even deserters and mutineers. Spaceships of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. Models are approx. 33 mm long and can be used to represent classic Rogue Trader escorts. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Drone swarm tokens (Attack Craft) of the Space Dwarves. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. Includes 5x of each: Assaultdrill, Bomber, Fighter. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Dwarven Battlefactories are amongst the toughest ship ever built and can be seen orbiting ardent stars or dangerous stellar bodies alike, probing for valuable resources. While perfectly capable of fending for itself due to heavy automation, it's usually surrounded by a flock of smaller mining and commerce vessels. Spaceship of the Space Dwarves. For collectors, painters and gamers, eg. as Demiurg in Battlefleet Gothic; or for Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargames. The battlefactory is about 100 mm long and can be used to e.g. represent a Demiurg Stronghold, a "Fortress Mining Combine" from "Book of the Void 2", or a large factory ship.Includes a docking arm to attach an escort sized ship. 2 of the 4 modifications are on the underside of the ship. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Stonekin's Industrial ships are monolithic constructs built to gather, process and sell a myriad of resources. Their cruisers are generally the centerpoint of a complex network of mining and transport drones going back and forth between prospecting ships and ore rich asteroids. Spaceship of the Space Dwarves. For collectors, painters and gamers, eg. as Demiurg in Battlefleet Gothic; or for Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargames. The ship is 75 mm long and can be used to represent e.g. a Demiurg Citadel cruiser, Bastion cruiser or a factory ship. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Stonekins make extensive use of drones, so much that most if not all of their smaller crafts are unmanned and remote controlled from larger ships. Transport barges are no exceptions allowing the dwarves to create an efficient logistic network with minimal crew. Spaceships of the Space Dwarves. For collectors, painters and gamers, eg. as Demiurg in Battlefleet Gothic; or for Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargames. The ships are 24 mm and 34 mm long and can be used to represent standard dwarven transports for convoys or as mission objectives. Contains 3 ships (Cargo will be picked randomly out of two variants). Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

The mining guilds are always surrounding themselves with large escort drones to drive away anyone foolish enough to try and steal their gold and gems. Remotely controlled, these ships are built like their masters, short, tough and stubborn. Spaceships of the Space Dwarves. For collectors, painters and gamers, eg. as Demiurg in Battlefleet Gothic; or for Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargames. The ships are 40 mm long and can be used to e.g. represent the Demiurg escorts drones from Book of the Void 2. The Warpcutters come in a random mix of two variants, silos closed and open. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Built on a common reliable hull, Stonekin's light cruisers can bring several tools to their fleet ranging from additional firepower, manufacturing and processing capabilities to direct ship maintenance and field repair. Spaceship of the Space Dwarves. For collectors, painters and gamers, eg. as Demiurg in Battlefleet Gothic; or for Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargames. The ship is 60 mm long and can be used to e.g. represent a Demiurg Citadel cruiser or a factory ship. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Built on a common reliable hull, Stonekin light cruisers can bring several tools to their fleet ranging from additional firepower, manufacturing and processing capabilities to direct ship maintenance and field repair. Spaceship of the Space Dwarves. For collectors, painters and gamers, eg. as Demiurg in Battlefleet Gothic; or for Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Dropfleet Commander or other Science Fiction spaceship miniature wargames. The ship is 60 mm long and can be used to e.g. represent "The Keep", a special support ship from Book of the Void 2. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

A new rendition of a Trade Galleon with a simple and more reliable aesthetic fitting for a hardened civilian fleet. Rivaling even military cruisers in size and weaponry, they can be seen at the hands of either the most successful merchant captains or the most feared corsairs. Spaceship of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. Models are about 80 mm long and can be used as Rogue Trader cruisers or "Imperator", "Archis Noca" and "Domitor Astra" variants from Warp Rift issue 17. They can also represent civilian and marauder ships or heavy freighters. Only compatible with 17 mm broadsides, e.g. from Bluesquat or Soulforge Studios. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Very ancient to human standards, this type of ship would carry the gold and wine of captains from old tales. The ones that aren't passed along merchant families are owned by legendary pirate lords who use it's mighty broadsides to strike fear into transport convoys. Spaceship of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. The ship is about 90 mm long and can be used as Rogue Trader cruiser. It can also represent an ancient cargo or exploration ship. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.

Very ancient to human standards, this type of ship would carry the gold and wine of captains from old tales. The ones that aren't passed along merchant families are owned by legendary pirate lords who use it's mighty broadsides to strike fear into transport convoys. Spaceship of the Free Traders. For space miniature war- and boardgames like e.g. for Battlefleet Gothic, Dropfleet Commander, Firestorm Armada, Full Thrust, A Billion Suns, Warfleets: FTL, Void Admiral, Brutal Space, or Twilight Imperium. The ship is about 90 mm long and can be used as Rogue Trader cruiser. It can also represent an ancient cargo or exploration ship. Only compatible with 17 mm broadsides, e.g. from Bluesquat or Soulforge Studios. Please note that the models are supplied WITHOUT bases. The pictures show a digital render. The 3D files are from Bluesquat. These 3D files are produced and sold under a commercial licence. Most of the miniatures are printed after you order them. The long processing time allows me to sensibly plan my working and printing time. Whenever possible, I try to cut the processing time short. The models are delivered unpainted and unassambled. This is a 3D printed product made of UV hardened resin. Models are cleaned and completely cured with UV light. Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product. Remains of the support structure might still be on the model and can be removed with a sharp hobby knife. Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper. It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty. Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position. Important noticeWarning! Not for children under the age of 3. Choking hazard due to small parts.This product is not a toy.