Product number:
TTS10189
Manufacturer
Tabletop-Stuff
Weight:
0.01 kg
Product Sample
Free product sample. You only pay for packaging and shipping.
These are (mostly) prints with errors, e.g. missing fingers, limbs, "pancake" spots (flat/squashed spots where the supports have failed, but the spot will later be reconnected to the model) or similar.
The resin color has a strong influence on perception, it is best to prime the models so that the details can be seen clearly.
The resin color has a strong influence on perception, it is best to prime the models so that the details can be seen clearly.
The models are delivered unpainted and unassambled.
This is a 3D printed product made of UV hardened resin.
Models are cleaned and completely cured with UV light.
Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product.
Remains of the support structure might still be on the model and can be removed with a sharp hobby knife.
Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper.
It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty.
Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position.
Models are cleaned and completely cured with UV light.
Before printing, a support structure needs to be added to the models, these are normally removed after printing, but leave "scars" on the model. These are production-related and do not represent a defect in the product.
Remains of the support structure might still be on the model and can be removed with a sharp hobby knife.
Resin dust is a health hazard if inhaled into the lungs. Sanding and filing is not recommended. Otherwise, such work should only be carried out with appropriate protective equipment (fine dust mask) and/or wet sandpaper.
It's possible that the models are hollow. In this case, the model has drainage holes through which the liquid resin could leak out. The inside of the model was then also cured. Drainage holes can be closed with modelling putty.
Resin is heat-sensitive and can therefore deform during the printing process, the removal of the support structures, post-process curing, or shipping. Hot water or a heat gun/hair dryer can quickly remedy this. The affected part is heated and then carefully bent into the correct position.
Important notice
Warning! Not for children under the age of 3. Choking hazard due to small parts.
This product is not a toy.
Warning! Not for children under the age of 3. Choking hazard due to small parts.
This product is not a toy.
Login
Manufacturer in the sense of the General Product Safety Regulation (GPSR): Tabletop-Stuff - Simon Saier
Manufacturer Address: Bichler Str. 4a, 82377 Penzberg, Germany
Manufacturer Email: info@tabletop-stuff.de
Manufacturer Address: Bichler Str. 4a, 82377 Penzberg, Germany
Manufacturer Email: info@tabletop-stuff.de